Difference between revisions of "Makerbot Thing-O-Matic accumulated knowledge"

From Collexion
Jump to: navigation, search
(Created page with "==Required Reading== From the Thing-O-Matic Assembly Instructions / User Manual: *'''[http://wiki.makerbot.com/thingomatic-doc:testing-your-bot#toc5 Testing Your Bot: Testing You...")
 
Line 7: Line 7:
 
*[http://wiki.makerbot.com/cupcake-dont-do-that Don't Do That!]
 
*[http://wiki.makerbot.com/cupcake-dont-do-that Don't Do That!]
 
*[http://blog.makerbot.com/2011/03/10/maker-bot-party-mode/ Makerbot Party Mode]
 
*[http://blog.makerbot.com/2011/03/10/maker-bot-party-mode/ Makerbot Party Mode]
 +
 +
 +
Example start.gcode:
 +
<pre>
 +
(**** beginning of start.gcode ****)
 +
(This file is for a MakerBot Thing-O-Matic)
 +
(**** begin initialization commands ****)
 +
G21 (set units to mm)
 +
G90 (set positioning to absolute)
 +
M108 R1.98 (set extruder speed)
 +
M103 (Make sure extruder is off)
 +
M104 S225 T0 (set extruder temperature)
 +
M109 S115 T0 (set heated-build-platform temperature)                    <------- Change this
 +
(**** end initialization commands ****)
 +
(**** begin homing ****)
 +
G162 Z F500 (home Z axis maximum)
 +
G161 X Y F2500 (home XY axes minimum)
 +
G92 Z107.2 ( ---=== Set Z axis maximum ===--- )                        <------- and this
 +
G92 X-57.5 Y-57 (set zero for X and Y)
 +
(**** end homing ****)
 +
(**** begin pre-wipe commands ****)
 +
G1 X52 Y-57.0 Z10 F3300.0 (move to waiting position)
 +
M6 T0 (wait for toolhead parts, nozzle, HBP, etc., to reach temperature)
 +
M101 (Extruder on, forward)
 +
G04 P5000 (Wait t/1000 seconds)
 +
M103 (Extruder off)
 +
(**** end pre-wipe commands ****)
 +
(**** end of start.gcode ****)
 +
</pre>

Revision as of 18:53, 7 April 2011

Required Reading

From the Thing-O-Matic Assembly Instructions / User Manual:

Suggested Reading


Example start.gcode:

(**** beginning of start.gcode ****)
(This file is for a MakerBot Thing-O-Matic)
(**** begin initialization commands ****)
G21 (set units to mm)
G90 (set positioning to absolute)
M108 R1.98 (set extruder speed)
M103 (Make sure extruder is off)
M104 S225 T0 (set extruder temperature)
M109 S115 T0 (set heated-build-platform temperature)                    <------- Change this
(**** end initialization commands ****)
(**** begin homing ****)
G162 Z F500 (home Z axis maximum)
G161 X Y F2500 (home XY axes minimum)
G92 Z107.2 ( ---=== Set Z axis maximum ===--- )                         <------- and this
G92 X-57.5 Y-57 (set zero for X and Y)
(**** end homing ****)
(**** begin pre-wipe commands ****)
G1 X52 Y-57.0 Z10 F3300.0 (move to waiting position)
M6 T0 (wait for toolhead parts, nozzle, HBP, etc., to reach temperature)
M101 (Extruder on, forward)
G04 P5000 (Wait t/1000 seconds)
M103 (Extruder off)
(**** end pre-wipe commands ****)
(**** end of start.gcode ****)