Difference between revisions of "Makerbot Thing-O-Matic accumulated knowledge"

From Collexion
Jump to: navigation, search
(Added a link to the profile maker and some instructions)
(Required Reading)
 
Line 1: Line 1:
 +
[[File:3775andAle81.jpg|right|400px|thumb|Makerbot Thing-O-Matic #3775]]
 
==Required Reading==
 
==Required Reading==
 
From the Thing-O-Matic Assembly Instructions / User Manual:
 
From the Thing-O-Matic Assembly Instructions / User Manual:
Line 7: Line 8:
 
* '''[http://makerblock.com/profilemaker Makerblock's Profilemaker]''' - Try 0.4mm layer height, 0.5mm thread width, and 2.84mm filament diameter (or measure it yourself with a caliper). Then load up ReplicatorG, open a .STL file, click the "Generate GCode" button, select your configuration profile and click "Edit..." to open skeinforge. Enter the profile maker's settings in skeinforge, click Save All, and return to ReplicatorG to generate gcode and begin printing.
 
* '''[http://makerblock.com/profilemaker Makerblock's Profilemaker]''' - Try 0.4mm layer height, 0.5mm thread width, and 2.84mm filament diameter (or measure it yourself with a caliper). Then load up ReplicatorG, open a .STL file, click the "Generate GCode" button, select your configuration profile and click "Edit..." to open skeinforge. Enter the profile maker's settings in skeinforge, click Save All, and return to ReplicatorG to generate gcode and begin printing.
 
* Make sure you [http://wiki.makerbot.com/thingomatic-doc:how-to-print#toc5 modify ReplicatorG's start.gcode] as shown below.
 
* Make sure you [http://wiki.makerbot.com/thingomatic-doc:how-to-print#toc5 modify ReplicatorG's start.gcode] as shown below.
 
  
 
==Suggested Reading==
 
==Suggested Reading==

Latest revision as of 18:54, 13 April 2011

Makerbot Thing-O-Matic #3775

Required Reading

From the Thing-O-Matic Assembly Instructions / User Manual:

ReplicatorG and skeinforge configuration (USE THIS TOOL to generate numbers to plug into your software):

  • Makerblock's Profilemaker - Try 0.4mm layer height, 0.5mm thread width, and 2.84mm filament diameter (or measure it yourself with a caliper). Then load up ReplicatorG, open a .STL file, click the "Generate GCode" button, select your configuration profile and click "Edit..." to open skeinforge. Enter the profile maker's settings in skeinforge, click Save All, and return to ReplicatorG to generate gcode and begin printing.
  • Make sure you modify ReplicatorG's start.gcode as shown below.

Suggested Reading


Example start.gcode:

(**** beginning of start.gcode ****)
(This file is for a MakerBot Thing-O-Matic)
(**** begin initialization commands ****)
G21 (set units to mm)
G90 (set positioning to absolute)
M108 R1.98 (set extruder speed)
M103 (Make sure extruder is off)
M104 S225 T0 (set extruder temperature)
M109 S115 T0 (set heated-build-platform temperature)                    <------- Change this
(**** end initialization commands ****)
(**** begin homing ****)
G162 Z F500 (home Z axis maximum)
G161 X Y F2500 (home XY axes minimum)
G92 Z107.2 ( ---=== Set Z axis maximum ===--- )                         <------- and this
G92 X-57.5 Y-57 (set zero for X and Y)
(**** end homing ****)
(**** begin pre-wipe commands ****)
G1 X52 Y-57.0 Z10 F3300.0 (move to waiting position)
M6 T0 (wait for toolhead parts, nozzle, HBP, etc., to reach temperature)
M101 (Extruder on, forward)
G04 P5000 (Wait t/1000 seconds)
M103 (Extruder off)
(**** end pre-wipe commands ****)
(**** end of start.gcode ****)