File list
This special page shows all uploaded files. When filtered by user, only files where that user uploaded the most recent version of the file are shown.
 Date |
Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 12:40, 5 April 2011 | Thing0 thing1.jpg (file) |  | 699 KB | Shrapnel | (Thing #0 and Thing #1, two 20mm calibration cubes.) | 1 |
| 12:37, 5 April 2011 | Makerbot printing cube2.jpg (file) |  | 995 KB | Shrapnel | (Collexion Makerbot printing Thing #1, another 20mm calibration cube.) | 1 |
| 12:32, 5 April 2011 | Makerbot printing cube1.jpg (file) |  | 1.05 MB | Shrapnel | (Collexion Makerbot printing Thing #1, another 20mm calibration cube.) | 1 |
| 12:39, 16 March 2011 | Extruder fix.jpg (file) |  | 134 KB | Shrapnel | (Slot carved into the acrylic to compensate for incorrectly-assembled extruder foot.) | 1 |
| 12:38, 16 March 2011 | Cracked acrylic.jpg (file) |  | 185 KB | Shrapnel | (Cracks around every hole in the acrylic, some worse than others.) | 1 |
| 16:45, 3 March 2011 | Session 2 photo 1.jpg (file) |  | 57 KB | Shrapnel | (The gang goes to town on the Makerbot at the second build session.) | 1 |
| 16:44, 3 March 2011 | Session 2 photo 2.jpg (file) |  | 49 KB | Shrapnel | (The gang continues to power through the Makerbot instructions at the second build session.) | 1 |
| 18:51, 26 February 2011 | Broken rib back.jpg (file) |  | 803 KB | Shrapnel | (Back of broken ABP, arrow points to epoxied joint) | 1 |
| 18:47, 26 February 2011 | Broken rib front.jpg (file) |  | 767 KB | Shrapnel | (ABP broken rib front, arrow points to epoxied joint) | 1 |
